chanpin

Alaabtayada

HLM Roller Mill

Rullalulatu toosan HLM waa qalab samaynta budo horumarsan kaas oo loogu talagalay iyadoo lagu saleynayo tignoolajiyada horumarsan ee adduunka ee Guilin Hongcheng.Warshada shiididda toosan waa qalab-shiidid gaar ah oo mideeya shiididda, qallajinta iyo kala soocidda, iyo gudbinta hal cutub.HLM taxane ah mishiinka rullaluistemadka toosan leeyahay faa'iidooyinka hufnaan shiidi sare, isticmaalka hoose, size quudinta weyn, fududaynta hagaajinta ganaax, hooseeyo kharashka hawlgalka, meel badbaadinta, qaylada hoose, xidhashada-adkeysi, ilaalinta deegaanka, iyo wixii la mid ah. Waxaa lagu dabaqaa tamarta korontada, biraha, kiimikada iyo warshadaha aan biraha ahayn, sida sibidhka portland iyo sibidhka la isku daray, limestone, slag, manganese, gypsum, dhuxusha, barayt, calcite iwm HLM warshad shiida toosan ayaa la xaqiijiyay inuu yahay qalab wax lagu shiidi karo oo badan. taas oo soo bandhigaysa faa'iidooyin badan marka loo eego shiidida kubbadda dhaqameed, sidoo kale way ka dhakhso badan tahay in la rakibo marka loo eego qalabka dhaqameed, taas oo si weyn u yaraynaysa kharashyada bilowga ah.

Haddii aad rabto inaad iibsato warshad toosan, fadlan guji LAXIRIIR HADDA hoose.

Waxaan jeclaan lahayn inaan kugula talinno qaabka ugu wanaagsan ee wax lagu shiidi karo si loo hubiyo inaad hesho natiijooyinka shiididda ee la rabo.Fadlan noo sheeg su'aalaha soo socda:

1.Walaxda ceeriin?

2.Lacagta loo baahan yahay(mesh/μm)?

3.Awoodda loo baahan yahay (t/h)?

  • Cabbirka quudinta ugu badan:50mm
  • Awoodda:10-150t/saacaddii
  • Wanaag200-325 mesh (75-44μm)

cabbir farsamo

HLM Taxanaha Roller Mill Taxane (warshadaha Kiimikada)

Qaabka Dhexroor miis shiidid dhexdhexaad ah (mm) Awoodda (t/saac) Cabbirka quudinta (mm) Qoyaanka Alaabta Wanaag (10-40 μm) Qoyaanka budada u dambeeya (%) Awood (kw)
HLM10/2X 800 1-3 0-15 <5% <97% ≤1 55
HLM16/2X 1250 2-7 0-20 <5% <97% ≤1 132
HLM17/2X 1300 3-12 0-25 <5% <97% ≤1 180
HLM19/2X 1500 4-16 0-35 <5% <97% ≤1 250
HLM21/2X 1700 6-24 0-35 <5% <97% ≤1 355
HLM21/3X 1750kii 7-27 0-35 <5% <97% ≤1 400
HLM24/2X 1900kii 7-28 0-35 <5% <97% ≤1 450
HLM29/3X 2400 9-35 0-40 <5% <97% ≤1 560
HLM29/4X 2400 10-39 0-40 <5% <97% ≤1 630
HLM30/2X 2800 11-45 0-50 <5% <97% ≤1 710

Fiiro gaar ah: Tusmada wax lagu shiido walxaha ceeriin≤18kWh/t.

 

HLM Roller Mill ee Sibidhka Qalafsan

Qaabka Dhexroor miis shiidid dhexdhexaad ah (mm) Awoodda (t/saac) Qoyaanka Alaabta Wanaag Awood (kw)
HLM30/2 2500 85-100 <10%

R0.008 <12%

800/900
HLM34/3 2800 130-160 <10% 1120/1250
HLM42/4 3400 190-240 <10% 1800/2000
HLM44/4 3700 190-240 <10% 2500/2800
HLM50/4 4200 240-300 <10% 3150/3350
HLM53/4 4500 320-400 <10% 3800/4200
HLM56/4 4800 400-500 <10% 4200/4500
HLM60/4 5100 550-670 <10% 5000/5400
HLM65/6 5600 600-730 <10% 5600/6000

Fiiro gaar ah: Heerka wax lagu shiido walxaha ceeriin≤13kWh/t.

 

HLM Roller Mill ee toosan ee Clinker

Qaabka Dhexroor miis shiidid dhexdhexaad ah (mm) Awoodda (t/saac) Qoyaanka Alaabta Aagga dusha gaarka ah Awood (kw)
HLM24/2P 1900kii 35-45 ≤2%

220-260m2/kg(R0.08≤15%)

560
HLM26/2P 2000 42-55 ≤2% 630
HLM30/2P 2500 60-75 ≤2% 900
HLM34/3P 2800 90-110 <≤2% 1400
HLM35/3P 2800 130-160 ≤2% 2000
HLM42/4P 3400 160-200 ≤2% 2500
HLM44/4P 3700 190-240 ≤2% 3000
HLM45/4P 3700 240-300 ≤2% 3800
HLM53/4P 4500 300-380 ≤2% 4800
HLM56/4P 4800 330-420 ≤2% 5300

Fiiro gaar ah: Heerka wax lagu shiido walxaha ceeriin≤18kWh/t.

 

HLM Roller Mill ee Toosan ee Slag

Qaabka Dhexroor miis shiidid dhexdhexaad ah (mm) Awoodda (t/saac) Qoyaanka Alaabta Aagga dusha gaarka ah Awood (kw)
HLM26/S 2000 15-18 <15%

≥420m2/kg

560
HLM30/2S 2500 23-26 <15% 900
HLM34/3S 2800 50-60 <15% 1800
HLM42/4S 3400 70-83 <15% 2500
HLM44/4S 3700 90-110 <15% 3350
HLM50/4S 4200 110-140 <15% 3800
HLM53/4S 4500 130-150 <15% 4500
HLM56/4S 4800 150-180 <15% 5300
HLM60/4S 5100 180-200 <15% 6100
HLM65/6S 5600 200-220 <15% 6450/6700

Fiiro gaar ah: Tusmaha wax lagu shiido alaabta ceeriin≤25kWh/t.Heerka wax lagu shiido walxaha ceeriin ≤30kWh/t.

 

HLM Tooska ah Mill ee Kaarboon

Qaabka Dhexroor miis shiidid dhexdhexaad ah (mm) Awoodda (t/saac) Qoyaanka Alaabta Wanaagsanaanta budada kaarboon Awood (kw)
HLM10/2M 800 3-5 <15%

R0.08=10%-15%

45/55
HLM14/2M 1100 7-10 <15% 90/110
HLM16/2M 1250 9-12 <15% 110/132
HLM17/2M 1300 13-17 <15% 160/185
HLM18/2M 1300 14-19 <15% 185/250
HLM19/2M 1400 18-24 <15% 220/250
HLM21/2M 1700 23-30 <15% 280/315
HLM24/2M 1900kii 29-37 <15% 355/400

 

Qaabka Dhexroor miis shiidid dhexdhexaad ah (mm) Awoodda (t/saac) Qoyaanka Alaabta Wanaagsanaanta budada kaarboon Awood (kw)
HLM28/2M 2200 36-45 <15%

R0.08=10%-15%

450/500
HLM29/2M 2400 45-56 <15% 560/630
HLM30/2M 2500 45-56 <15% 710/800
HLM34/3M 2800 45-56 <15% 900/1120
HLM42/4M 3400 45-56 <15% 1400/1600
HLM45/4M 3700 45-56 <15% 1800/2000
HLM50/4M 4200 45-56 <15% 2500/2800
HLM56/4M 4800 45-56 <15% 3150/3500

Fiiro gaar ah: Kaarboon hardgrove shiid index 50 ~ 70

Habaynta
agabka

Qalabka lagu dabaqi karo

Guilin HongCheng shiidista ayaa ku habboon in lagu shiido walxaha macdanta aan birta ahayn ee kala duwan oo leh adkaanta Mohs ee ka hooseeya 7 iyo qoyaan ka hooseeya 6%, ganaaxa ugu dambeeya ayaa lagu hagaajin karaa inta u dhaxaysa 60-2500mesh.Qalabka lagu dabaqi karo sida marmar, dhagax nuurad, calcite, feldspar, kaarboon firfircoon, barite, fluorite, gypsum, dhoobo, graphite, kaolin, wollastonite, quicklime, manganese ore, bentonite, talc, asbestos, mica, clinker, feldspar, quartz, ceramics, bauxite, iwm. Fadlan nala soo xiriir wixii faahfaahin ah.

  • calcium carbonate

    kaarboonka calcium

  • dolomite

    dolomite

  • limestone

    dhagax nuurad

  • marble

    marmar

  • talc

    talc

  • Faa'iidooyinka Farsamada

    The final product has stable quality. Short dwell time of the material to be ground can ensure even particle shape and excellent fluidity. The few iron content is easy to remove to guarantee high whiteness and purity.

    Badeecada ugu dambeysa waxay leedahay tayo xasilloon.Waqtiga gaaban ee alaabta dhulka la dhigayo waxay xaqiijin kartaa xitaa qaabka walxaha iyo dareeraha ugu fiican.Inta yar ee ka kooban birta waa ay fududahay in la saaro si loo dammaanad qaado cadaanka sare iyo nadiifnimada.

    Higher grinding efficiency, lower energy consumption. The power consumption is 40% -50% lower than ball mill. The single unit has high throughput, and can use valley electricity.

    Waxtarka shiidida sare, isticmaalka tamarta hoose.Isticmaalka korontadu waa 40% -50% ka hooseeya mishiinka kubbadda.Hal unug ayaa leh wax-soo-saar sare, waxayna isticmaali kartaa korontada dooxada.

    Environmental Protection. The whole system of the HLM vertical roller mill has low vibration and low noise, it is sealed and operated under negative pressure, no spillage of dust, and can basically realize dust-free workshop.

    Ilaalinta deegaanka.Nidaamka oo dhan ee rullaluistemadka toosan HLM leeyahay gariir hoose iyo qaylada hoose, waxaa la shaabadeeyey oo ku shaqeeya cadaadis taban, ma daadin boodh ah, oo asal ahaan xaqiijin kara aqoon-is-weydaarsiga-free boodhka.

    Ease of maintenance, lower operating cost. The grinding roller can be taken out from the machine through the hydraulic device, a large space for maintenance. Both the two sides of the roller shell can be used for a longer working life. The mill can run without raw material on the grinding table, which erases the difficulty in starting.

    Fududeynta dayactirka, hoos u dhaca kharashka hawlgalka.Roolaha wax lagu shiido waxaa laga soo saari karaa mishiinka iyada oo loo marayo qalabka hydraulic, meel weyn oo loogu talagalay dayactirka.Labada dhinac ee qolofta rullaluistu waxay u isticmaali karaan nolol shaqo oo dheer.Mashiinku wuxuu socon karaa iyada oo aan alaabta ceeriin miiska wax lagu shiidi, taas oo tirtiraysa dhibka bilawga ah.

    Rollers with height-controlled device, which could avoid strong vibration that caused due to short of material on the table. Newly-designed roller sealing component ensures the reliable sealing without sealing the blower, which can lower the oxygen content in the mill to prevent the possibility of explosion.

    Rollers oo leh qalabka lagu koontaroolo dhererka, kaas oo ka fogaan kara gariirka xooggan ee sababay wax yar oo miiska saaran.Qaybta xidhitaanka rullaluistemadka ee dhawaan-nakhshadeeyay waxay hubisaa xidhidh la isku halayn karo iyada oo aan la xidhin afuufiyaha, taas oo hoos u dhigi karta nuxurka ogsijiinta ee warshadda si looga hortago suurtagalnimada qarax.

    The mill integrates crushing, drying, grinding, classifying and conveying materials in one continuous, automated operation. Compact layout requires less footprint which is 50% of the ball mill. It can be installed in outdoors, lower construction cost can save initial investment.

    Mashiinku wuxuu isku daraa burburinta, qallajinta, shiididda, kala soocida iyo gudbinta agabka hal hawlgal oo iswada oo joogto ah.Qaabaynta is haysta waxay u baahan tahay raad ka yar taas oo ah 50% warshadda kubbadda.Waxaa lagu rakibi karaa dibadda, kharashka dhismaha hoose wuxuu badbaadin karaa maalgelinta bilowga ah.

    High degree of automation. It adopts the PLC automatic control system and can realize remote control, ease of operation and maintenance, labor costs saving.

    Heerka sare ee otomaatiga.Waxay qabataa nidaamka xakamaynta tooska ah ee PLC waxayna xaqiijin kartaa kontoroolka fog, fududaynta hawlgalka iyo dayactirka, badbaadinta kharashka shaqada.

    features high drying ability with hot air direct contact with the material in the mill, maximal feeding moisture is up to 15%. A separate drying machine and energy for the mill system can be both saved. The vertical mill can satisfy the materials in different moisture by adjusting the hot air temperature.

    waxay leedahay awood qalajin sare leh oo leh hawo kulul taabasho toos ah oo ay la leedahay walxaha ku jira shiidka, qoyaanka quudinta ugu badan ayaa ah ilaa 15%.Mashiin qallajin gaar ah iyo tamarta nidaamka shiididda waa la badbaadin karaa.Warshadaynta toosan waxay ku qancin kartaa alaabta qoyaanka kala duwan iyadoo la hagaajinayo heerkulka hawada kulul.

    Kiisaska alaabta

    Loogu talagalay oo loo dhisay xirfadlayaasha

    • Dhab ahaantii wax tanaasul ah ma laha tayada
    • Dhisme adag oo waara
    • Qaybaha tayada ugu sarreeya
    • Bir adag oo adag, aluminium
    • Horumar iyo horumar joogto ah
    • HLM vertical grinding machine
    • HLM vertical grinding mill
    • HLM vertical mill machine
    • HLM vertical mill manufacturer
    • HLM Steel slag vertical mill
    • HLM vertical roller mill
    • HLM vertical roller mill machine
    • HLM Vertical Roller Mill

    Qaab-dhismeedka iyo Mabda'a

    Sida rullaluistemadka toosan u shaqeeyo, matoorku waxa uu wadaa wax-dhiyeha si uu u wareego garaaca, alaabta ceeriin waxaa la geeyaa bartamaha garaaca qufulka hawada qufulka quudiyaha.Maaddadu waxay u guurtaa cidhifka garaaca iyadoo ay ugu wacan tahay saamaynta xoogga centrifugal iyo in ka badan in lagu dhufto xoogga rullaluistemadka oo lagu miiray tuujin, shiidi iyo gooyn.Isla mar ahaantaana, hawada kulul ayaa lagu afuufay agagaarka garaaca oo kor u qaad alaabta dhulka.Hawada kulul ayaa engejin doonta shayga sabeynaya oo dib ugu soo celin doonta garaaca.Budada khafiifka ah ayaa loo keeni doonaa kala soociyaasha, budada ganaaxa ee tayada leh ayaa ka soo bixi doonta shiidka oo waxaa qaadi doona boodhka ururiyaha, halka budada aan qallafsanayn ay hoos ugu dhacayso garaaca daabkii kalastaha oo haddana la shiidayo.Wareeggani waa habka oo dhan ee shiididda.

    HLM Structure 1

    Qalabka rullaluistemadka tooska ah ee HLM iyadoo la adeegsanayo cutubyada caadiga ah si loo naqshadeeyo loona sameeyo aaladda cadaadiska.Marka ay kordho awoodda, tirooyinka rullaluistemadka ayaa kordhin doona (waxaan isticmaali karnaa 2, 3 ama 4, ugu badnaan 6 rollers) ee ku habboon iyo isku dhafka si loo dejiyo qalabyo taxane ah oo kala duwan oo leh awoodo kala duwan qaybaha ugu yar ee caadiga ah si loo buuxiyo shuruudaha alaabta kala duwan, ganaax iyo wax soo saar.

    HLM Structure 2

    Nidaamka Ururinta Siigada Gaarka ah I

    Unique Dust Collection System I

    Habka ururinta boodhka kali ah II

    Single dust collection system II

    Nidaamka ururinta siigada labaad

    Secondary dust collection system

    Waxaan jeclaan lahayn inaan kugula talinno qaabka ugu wanaagsan ee wax lagu shiidi karo si loo hubiyo inaad hesho natiijooyinka shiididda ee la rabo.Fadlan noo sheeg su'aalaha soo socda:
    1.Walaxda ceeriin?
    2.Lacagta loo baahan yahay(mesh/μm)?
    3.Awoodda loo baahan yahay (t/h)?